WOER produces a range of separable Elbow, Straight and Tee connector kits. Our separable connectors are widely used in switchgears, transformers, cabinets and other electrical equipments. It is made of EPDM or silicone rubber with integrated field control. WOER adopts advanced triple-layer (a conductive inner layer, an insulation layer and a conductive outer layer) injection technique to guarantee the interface property to avoid gaps between layers and decrease partial discharge maximally. Our separable connectors are mainly delivered in 3-phase kit. Each kit contains all the necessary accessories.
250A Plug-in Type Interface A Series
400A Plug-In Type Interface B Series
630A Bolted-type Interface C Series
630A Bolted-type Interface E Series
Loadbreak Series
Deadbreak Series
Accessories
Busbar Connecting System
Inner Cone Plug-in Serial up to 42kV
1. EN 50181
Plug-in type bushings above 1kV up to 52kV and from 250A to 2.5kA for equipment other than liquid filled transformers.
2. EN 50180
Bushings above 1kV up to 36kV and from 250A to 3.15kA for liquid filled transformers.
3. HD 629.1
Test requirements on accessories for used on power cables of rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1: cables with extruded insulation.
4. IEC 60502.4
Woer Power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.2kV) up to 30kV(Um=36kV)-part 4: test requirements on accessories for cable with rated voltages from 6kV up to 30kV(Um=36kV).
5. IEC 60099
Metal oxide surge arresters without gaps for a.c. systems.
6. JB/T 8952
Polymer-housed metal oxide surge arresters without gaps for a.c. systems.
EN
